How To Connect Your Canon Ts3122 Printer To Wifi. In the run box, type control panel and select ok. Please click here further guidance.
Use airprint to print from an ios device such as an iphone, ipad, or ipod touch, or from a mac. If your aren't able to view the video above, please follow this link. Please click here further guidance.
Please Click Here Further Guidance.
Learn how to use easy wireless connect setup on your canon pixma ts3122 to print on a wireless network. Load two sheets of standard paper (letter size). Enter your printer's model name and tap go.
Press And Hold The Direct Button ( C ) On The Printer, And Then Release The Button When ( D) Flashes.
If you have an android or ios device, you can use canon's free print app to connect the printer to. Make sure that the lamp next to this button starts to flash blue and then go to your. Is it possible to connect a ts3122 printer to wifi if the router does not have a wps button?
Open An Internet Browser And Type In 192.168.*.* (The Default Address For Most Printers) Choose Yes When Prompted About Whether Or Not You Want To Continue Printing Over A Wireless Connection.
Hi, if you have an android or ios device, you can use canon's free print app to connect the printer to your network. Make sure and the horizontal bars ( e) flash as shown. See the procedure below to start the easy wireless connect.
Effortlessly Set Up Your Canon Pixma Ts3122 Printer To Print On A Wireless Network Using Easy Wireless Connect Wireless Setup.
Use airprint to print from an ios device such as an iphone, ipad, or ipod touch, or from a mac. Learn and watch how to set up your canon pixma ts3122 printer on a wireless network via the easy wireless connect setup method. This should cause the printer to print out the required wireless setting information for the printer, including the wps pin code.
Effortlessly Set Up Your Canon Pixma Ts3122 Printer To Print On A Wireless Network.
Access this url from the smartphone/tablet you want to use with the printer. Please make sure you follow the steps as under correctly; Wait until all of the lights are green before closing any windows or disconnecting from the usb cable, then print as usual.